Account

You are currently not logged in yet.

Login
Home Industrial-cameras Right-angled-camera MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color

MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color

MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color
MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color
MER2-1220-32U3C-W90, IMX226, 4024x3036, 32fps, 1/1.7", Rolling shutter, right angle (90), Color
* USB3.0 Interface * right angle (90 degree) * Certified by TÃœV Rheinland *

Product number

MER2-1220-32U3C-W90

Delivery time (weeks)

Standard 3-6, Express 0-3

€ 287,00
Price per piece
Quantity: 
Order
 

Do you have a question about this product?

Ask us your question

Industrial USB 3.0 Vision camera with 90 degree head

The Mercury2 USB3.0 camera is an industrial vision camera, with an USB 3.0 interface and a 90 degree camerahead. USB 3.0 is an appropriate interface for high resolution and high-speed cameras. This interface is very suitable for embedded platforms such as the Raspberry Pi (4 or higher), NVIDIA family and for standard computers.
This industrial vision camera model is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 4.5 meters (or 10 meter using optical USB3 cable)
-    Only one cable is required to connect the device
-    Compact dimensions due to 90 degree right angle head
-    Suitable for computers (x86) and embedded platforms: ARM V7 & ARM V8
-    Hardware triggering (I/O cable is required)

For more details about our industrial USB 3.0 vision cameras check our manual.

MTBF, warranty & product life cycle

Each year, Daheng Imaging produces more than 100.000 industrial cameras according to the highest quality standards. The mean time between failure (MTBF) is more than 400.000 hours (45 years, 24/7). The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is available for at least 7 years. Most cameras have a much longer product life cycle. For more information about our product life cycle management, check this article.

Industrial Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera. Due to the RGB filter on the pixels, every single pixel, considering white light, captures up to 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens
Compared to security cameras and webcams, an industrial color camera has larger and more light sensitve pixels. Providing you an excellent image quality.  

I/O port for hardwaretrigger, strobecontrol or PLC communication

The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example an industrial machine vision light. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual. You can also check our article: hardware triggering multiple industrial cameras.

Specification

Interface
USB3
Resolution
4024x3036
Frame rate
32fps
Pixel Size
1.85uM
Color/Mono
Color
Sensor Type
Sony IMX226
Optical Size
1/1.7"
Shutter Type
Rolling Shutter
Shutter time
3us~1s
ADC Bit Depth
12bit
Pixel Bit Depth
8bit, 12bit
Digital gain
0dB~24dB
Pixel Data Format
Bayer GR8 / Bayer GR12
Synchronization
Hardware trigger, software trigger
I/O
1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Operating Temp.
0°C~45°C
Operating Humidity
10%~80%
Lensmount
C
Dimensions
29x29x58.8mm
Software
Windows / Linux / Android
Power Consumption
<2.7W@5V
Weight
78g
Conformity
RoHS, CE, FCC, USB3 Vision, Genicam

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.