Account

You are currently not logged in yet.

Login
Home Industrial-cameras EOL models MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P

MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P

MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P
MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P
MER-504-10GC-P, EOL, Replacement is MER2-503-23GC-P
NOT RECOMMENDED FOR NEW INDESIGN | LAST TIME BUY 20-03-2021

Product number

MER-504-10GC-P

Request a quotation
 

Do you have a question about this product?

Ask us your question

NOT RECOMMENDED FOR NEW INDESIGN | LAST TIME BUY 20-03-2021

GigE Vision Camera

The Mercury GigE camera series is an industrial vision camera, with a GigE interface. GigE is the most common interface used for cameras in traditional machine vision applications. The camera is available with and without Power over Ethernet (PoE).
This model is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 100 meters
-    Inexpensive and easy installation of cables
-    Only one cable is required to connect the device (in case of PoE)
-    Dimensions are: 29x29x29mm (without PoE), 29x29x38 mm (with PoE)
-    Optional hardware triggering

If more details are required, the manual can be consulted.

Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens

PoE

Power over Ethernet (PoE) for GigE is designed to provide both power and data communication over a standard Ethernet cable. This reduces the amount of cables and installation time, in applications that do not require a hardware trigger or I/O. When I/O is required in an application we advise to supply the camera via a I/O connector. The camera’s power usage is larger when using Power over Ethernet than via the I/O connector. The camera will generate extra heat when using PoE. A PoE GigE camera is larger than the version without PoE. An extra PCB is needed to separate the power of the Ethernet signal, and to convert the voltage to a lower voltage. Extra hardware is needed, which makes it more expensive than the version without PoE. The advantage of PoE is that installation is easier because less cables are required.

Specification

Interface
GigE
Resolution
2448x2048
Frame rate
10fps
Pixel Size
3.45uM
Color/Mono
Color
Sensor Type
Sharp 5M (CCD)
Optical Size
2/3"
Shutter Type
Global Shutter
Shutter time
52us~1s
ADC Bit Depth
12bit
Pixel Bit Depth
8bit, 12bit
Digital gain
0dB ~ 25dB
Pixel Data Format
BayerRG8 / BayerRG12
Synchronization
Hardware trigger, software trigger
I/O
1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Operating Temp.
0°C~45°C
Operating Humidity
10%~80%
Lensmount
C
Dimensions
38.3x29x29mm
Software
Windows / Linux / Android
Power Consumption
<3W@12V <3.75W@PoE
Weight
75g
Conformity
RoHS, CE, FCC, GigE Vision, Genicam

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.