Account

You are currently not logged in yet.

Login
Home Industrial-cameras EOL models MER-131-210U3C, EOL, Replacement is MER2-160-227U3C

MER-131-210U3C, EOL, Replacement is MER2-160-227U3C

MER-131-210U3C, EOL, Replacement is MER2-160-227U3C MER-131-210U3C, EOL, Replacement is MER2-160-227U3C
MER-131-210U3C, EOL, Replacement is MER2-160-227U3C MER-131-210U3C, EOL, Replacement is MER2-160-227U3C
MER-131-210U3C, EOL, Replacement is MER2-160-227U3C
* USB3.0 Interface * 3 year warranty * Certified by TÃœV Rheinland *

Product number

MER-131-210U3C

Request a quotation
 

Do you have a question about this product?

Ask us your question

USB3 Vision Camera

The Mercury USB3.0 camera series is an industrial vision camera, with an USB3.0 interface. USB3.0 is an appropriate interface for high resolution and high-speed cameras. Furthermore, this interface is very suitable for embedded platforms such as the Raspberry Pi 3, NVIDIA Jetson TX1, TX2 and Tegra TK1.
This model is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 4.5 meters
-    Only one cable is required to connect the device
-    Dimensions are: 29x29x29mm
-    Suitable for PC’s and embedded platforms: ARM V7 & ARM V8
-    Optional hardware triggering

If more details are required, the manual can be consulted.

Warranty & Product Life Cycle

Daheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our product life cycle management, check this article.

Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens

With I/O

The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example: LED. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual.

Specification

Interface
USB3
Resolution
1280x1024
Frame rate
210fps
Pixel Size
4.8uM
Color/Mono
Color
Sensor Type
OnSemi PYTHON 1300
Optical Size
1/2"
Shutter Type
Global Shutter
Shutter time
52us~1s
ADC Bit Depth
10bit
Pixel Bit Depth
8bit, 10bit
Digital gain
0dB ~ 16dB
Pixel Data Format
Bayer RG8 / Bayer RG10
Synchronization
Hardware trigger, software trigger
I/O
1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Operating Temp.
0°C~45°C
Operating Humidity
10%~80%
Lensmount
C
Dimensions
29x29x29mm
Software
Windows / Linux / Android
Power Consumption
<2.7W@5V
Weight
57g
Conformity
RoHS, CE, FCC, USB3 Vision, Genicam

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.