Buy an industrial USB3 camera
GeT Cameras offers industrial USB3 camera
s for industrial, pharmaceutical and machine vision applications. Thereby we are the cheapest in the industrial market. Our cameras complies with the industrial “USB3 Vision” standard. The industrial USB camera
is equipped with a CMOS
image sensor. There are cameras with and without housing (USB3 board-level camera
). The USB3 board-level camera
series is suitable for high volume OEM projects.
The dimensions of the camera are 29x29x29mm. You can choose between an industrial USB camera with or without digital in and output (I/O). The USB camera without I/O
is indicated with an article number that ends with (“-L”).
GeT Cameras has a strong portfolio of industrial USB3.0 cameras
. Below you have an overview of all our models.
You can also find at the bottom of this page more general information such as features and benefits of an industrial USB3.0 camera.
Embedded Vision and an industrial USB3 camera?
Our USB3 cameras are working with the following Embedded platforms:
- Developer boards that have a ARMv7 or ARMv8 processor, such as Raspberry Pi 3, Odroid, NVIDIA Jetson TX1, TX2 and Tegra TK1
- Developer boards using an Intel X86 platform such as UP-Board
To support these platforms we offer the following tools:
- Drivers for Linux
- example scripts in C++, C# and python
See also our example how to connect an USB3 camera to a Raspberry Pi.
These USB3 cameras have a large bandwith
of 400 megabytes per second. Therefore, there is a lot data being sent over the USB3 cable to the computer. That is why it is essential to use a certified USB3 cable
. Cheaper USB3 cables are often of bad quality, whereby the maximum amount of bandwith
is not utilized. This results into an instable system. All USB3 cables in our online shop are officially certified by Daheng Imaging and are 100% compatible with all our industrial USB 3.0 cameras.
The cable length of USB3 is a maximum of 4.5 meters. If you need to bridge bigger distances you could in theory use active extender cables and USB hubs, although this is not advised.
Does the industrial USB3 camera work on the USB3 port on my computer?
An important aspect that is often overlooked is the USB3 chip of the computer. Older computers with first generation USB3 ports often cause instable bandwith
. The latest generation of computers with USB3 ports do not have any issues, but some older computers might not work properly with USB3. Of course, you also have the option to expand your current computer system with a USB3 controller with 4x USB3 ports
. Our USB3 controllers are certified by Daheng Imaging. By doing this, you are guaranteed of a stable image transmission and you have the option to connect multiple industrial USB cameras to one computer.
Difference between USB2 and USB3?
USB2.0 is an older USB-technology than USB3. USB3 is a suitable interface for high resolution and high-speed cameras and has a maximum bandwith
of 400 megabytes per second. This is 10 times faster than USB2 and 4 times faster than GigE. Every computer and almost all developer boards nowadays come with a USB3 port. The USB 3.0 camera uses less processing power than a USB2 camera, and there are pore USB3 cameras. USB3 is in fact the successor of USB2, which means that USB2 isn't really developed any further. The development of industrial USB 3.0 cameras on the other hand, is in full swing. So if a USB3 camera fits in with your budget, you should definitely go for one.
DirectShow and Software Development Kit (SDK)
Daheng Imaging’s industrial USB3 cameras are USB3 Vision compliant. The USB3 Vision Standard is developed by the European Machine Vision Association
(EMVA). Daheng Imaging is associated both with the EMVA and AIA (Automated Imaging Association
). The AIA is responsible for the further development and administration of the USB3 Vision protocol. This standardized protocol ensures that our industrial USB 3.0 cameras can communicate with all the standard image processing software packages. Examples are Matlab, Halcon, Adaptive Vision and Labview.
There is also a free SDK
available for this camera. With the help of our SDK you can simply control and modify parameters. The SDK contains example programs in the following languages: DotNet, C++ and C#. This allows for a simple integration into your software.
Our DirectShow driver for Microsoft Windows ensures that commercial programs recognize our cameras as a “webcam”. The camera will be automatically work after installing the driver in programs such as Skype and Ispy (recording software).
Questions about these cameras?
Are you considering buying an industrial USB3 camera
, but do you still have a few questions. Or would you like to be advised in selecting the right USB camera
? Feel free to contact
us then, we are eager to help you.