Account

You are currently not logged in yet.

Login
Home Industrial-cameras EOL models MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C

MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C

MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C
MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C
MARS-1230-23U3C, EOL, Replacement is ME2P-1230-23U3C
NOT RECOMMEND FOR NEW INDESIGN, Replacement is ME2P-1230-23U3C

Product number

MARS-1230-23U3C

Request a quotation
 

Do you have a question about this product?

Ask us your question

USB3 Vision Camera

The Mars USB3 Vision Camera series is an industrial vision camera, with a USB3 Vision interface. This industrial vision camera series feature high resolution, low noise global shutter sensors. USB3 is the high speed interface for industrial vision cameras, making it ideal for high resolution, highspeed image capturing.  The Mars series have advanced features like decimation, binning, pixel skipping, reverse and digital shift. The MARS USB3 VIsion Color cameras supports color correction for improving the image quality.
The USB3 Vision Camera Mars series is interesting for you when your application complies with the following conditions:
-    An industrial camera
-    Maximum cable length of 4,6 meters
-    Inexpensive and easy installation of cables
-    Only one cable is required to connect the device
-    Dimensions are: 62x62x50.4mm
-    Hardware triggering / Digital I/O
-    advanced image processing features

If more details are required, the manual of the MARS USB3 Vision camera can be consulted.

Warranty & Product Life Cycle

Daheng Imaging produce yearly more than 100.000 industrial cameras according to the highest quality standards. The industrial cameras are certified by TÜV Rheinland and have a 3 year warranty. After market introduction, every camera model is at least available for 7 years. Most cameras have even a much longer product life cycle. For more information about our product life cycle management, check this article.

Industrial Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens

Advanced vision camera features

The MARS USB3 vision camera serie has both standard and advanced features onboard, like:
- Programmable ROI, increased frame rate with partial scan
- Gain, exposure and white balance programmable (white balance only for color models)
- Support auto gain, auto exposure and auto white balance (auto white balance only for color models)
- Four acquisition controls: Single frame acquisition/Continuous acquisition/Software trigger acquisition/External trigger acquisition
- Trigger mode: Frame Start /Frame Burst Start
- Support LUTs and storable user sets
- Support decimation, binning, skipping, reverse and digital shift
- Support color correction for improving image quality (only for color models)
- Adjustable gamma for optimizing the brightness of the images
- Exposure delay effectively reduces the effect of the strobe delay
- User-defined data storage area: 16KB
- Compatible with GenICam™and GigE Vision®, can be used in a wide range of 3rd-party software such as HALCON and LabVIEW directly
- Optimized software package for lower CPU loads in host running 32/64bit Windows
- Multiple samples and easy-to-integrate SDK for various programming tools
- Regulations: CE, RoHS, GenICam, USB3 Vision

The complete set of features makes the MARS USB3 Vision camera serie a perfect choice for high performance image processing.

Specification

Interface
USB3
Resolution
4096x3000
Frame rate
23fps
Pixel Size
3.45uM
Color/Mono
Color
Sensor Type
Sony IMX304
Optical Size
1.1"
Shutter Type
Global Shutter
Shutter time
28us~1s
ADC Bit Depth
12bit
Pixel Bit Depth
8bit, 12bit
Digital gain
0dB~24dB
Pixel Data Format
Bayer GR8 / Bayer GR12
Synchronization
Hardware trigger, software trigger
I/O
1 opto-isolated input line and 1 opto isolated output line, 2 GPIO
Operating Temp.
0°C~45°C
Operating Humidity
10%~80%
Lensmount
C
Dimensions
62x62x50.4mm
Software
Windows / Linux / Android
Power Consumption
<4W@5V
Weight
281g
Conformity
RoHS, CE, USB3 Vision, GenICam

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.