• GB
  • NL
  • DE
30-50% cheaper than competitors Strong industrial camera portfolio Excellent support Certified by TÜV Rheinland 3 Year warranty
Home Technical whitepapers / articles

Technical whitepapers / articles

Rolling versus Global shutter

  20-10-2020     Comments (0)

Rolling versus Global shutter Global shutter is used for capturing moving objects, while rolling shutter is used for capturing still images. A rolling shutter camera is cheaper, especialy for resolutions above 1.6 Megapixel. A 12MP rolling shutter camera costs approx. 200 euro, while a 12MP global shutter costs approx. 1000 euro. A Global shutter has larger pixels, therefore a larger sensor as a rolling shutter camera. As a result, a global shutter camera is more light sensitive and produces sharper images. Exposure and Shutter Exposure time is a period of the shutter from open to close. During the period, the light exposing on the chip’s photosensitive array and Photoelectric effect occurs, then photoelectric charges are produced. By the A/D transformation, the grayscale value of each pixel is displayed. Under a certain light intensity, the...

Read more

What does ‘GeT Cameras Choice’ mean?

  Customer Support     07-10-2020     Comments (0)

What does ‘GeT Cameras Choice’ mean? You might have noticed that some of our cameras are marked as ‘GeT-Cameras Choice’. There are a few reasons why we recommend these cameras. In this article we explain these reasons.   Recommended for new indesigns The main reason that a camera is marked as ‘GeT Cameras Choice’ is because we recommend this camera for your new development. The camera is in an early stage of its product life cycle. Every camera is at least available for 7 years after market introduction. Our track record shows an average availability of 12-15 years. Read more about product life cycle on our machine vision knowledge center: Product life cycle of industrial cameras. Newest image sensors Additionally the image sensor is one of the latest generations. Using the most recent released image sensors results in sharper images...

Read more

Vision hardware design rules to reduce the cost price of your project

  Team GeT Cameras     13-05-2020     Comments (0)

Vision hardware design rules to reduce the cost price of your project Gaspar van Elmbt, the managing director of GeT-Cameras, had planned to give a presentation about cost reducing vision hardware design at the UKIVA this month. However, due to the Covid’19 virus this event got cancelled. The organization of this event managed to provide the visitors with all the presentations, included ours, on the ‘presentation hub’.   If you want to learn how to reduce the cost price of your project, make sure to take a look at the presentation in the video below.    

Read more

Product life cycle of industrial cameras

  Technical support     07-05-2020     Comments (0)

Product life cycle of industrial cameras All our industrial cameras have a minimum life cycle of 7 years after market introduction. The graph below shows the typical product life cycle stages of an industrial camera. Market introduction of an industrial camera When a camera is released it has the latest generation sensor. In almost all cases the latest generation sensor is more light senstive and has less noise than previous generation sensors. Therefore a better image quality can be achieved. Check for newer alternatives After 3-7 years, sensor manufacturers will release a new version of the sensor or a sensor from a different brand might have better imaging performance. Therefore during this period it's important to check if there are other camera types available that have a newer image sensor. EOL Notification Unfortunately cameras do go End of Life (EOL)....

Read more

How to select a machine vision camera interface (USB3 / GigE / 5GigE / 10GigE Vision)?

  Vision camera specialist     28-06-2019     Comments (2)

How to select a machine vision camera interface (USB3 / GigE / 5GigE / 10GigE Vision)? Machine vision camera Interface whitepaper This article will provide a deeper inside in what the benefits and downsides are of each type of machine vision camera interface, so you can select the right interface for your machine vision application. It has to be noted that GeT cameras only supplies USB 2.0 , USB 3.0 , GigE , 5GigE and 10GigE machine vision cameras and the article will mainly be focused on these five industrial machine vision interfaces. However in the table below we have incorporated also other interfaces to make the overview of industrial machine vision camera interfaces complete.     USB2 USB3 FireWire GigE CameraLink Coaxpress 5GigE 10GigE Bandwidth (Megabyte/s) 40 400 80 100...

Read more

Raspberry Pi with 20MP industrial camera

  Vision Camera Specialist     03-05-2019     Comments (0)

Raspberry Pi with 20MP industrial camera Arm embedded platforms are very popular for embedded vision. Many of these platforms have a USB2, USB3 and or GigE ethernet port. Our USB3 and GigE Vision Cameras work with these ARM embedded platforms. The Raspberry Pi, that has a USB2 port, even works with our USB3 cameras on reduced frame-rate . Which embedded board to select with USB3 Vision Camera There are many embedded boards available in the market that work with our USB3 Vision Cameras. The following ARM platforms were extensively tested with our machine vision cameras: - NVIDIA Jetson TX1/TX2 - NVIDIA Tegra TK1 - Toradex Apalis TK1 on Ixora Carrier Board - Raspberry Pi 3B, incl. support of the camera module. However other popular embedded boards are: - Odroid XU4 - NanoPi M4 - NVIDIA Jetson Nano - Firefly We especially like the Raspberry Pi for low end...

Read more

Industrial polarization camera whitepaper

  Vision Camera Specialist     04-12-2018     Comments (0)

Industrial polarization camera whitepaper Industrial Polarized Camera Daheng Imaging is dipping their toes in the industrial polarized camera segment by implementing the Sony-IMX250MZR monochrome image-sensor . The Industrial polarization camera systems are able to capture information which a normal line or area industrial camera is not able to obtain. A polarization camera conducts a two-dimensional analysis. It measures both the degree and direction of the polarization of the light. As a result the final image has almost none reflections from external lightsources. A polarized camera is ideal for applications like the inspection of glossy products and transparent products.   Standard machine vision camera versus polarized camera The following examples show on the left hand side an image captured with a standard machine vision camera and on the right...

Read more

Explanation of the USB3 Vision camera protocol | Top 5 reasons why to use an USB3.0 camera | Top 10 checklist for implementing an industrial USB3 Vision system

  Vision Camera Specialist     11-11-2018     Comments (0)

Explanation of the USB3 Vision camera protocol | Top 5 reasons why to use an USB3.0 camera | Top 10 checklist for implementing an industrial USB3 Vision system Introduction to the industrial machine vision USB3 Camera System USB3 Vision standard is an imaging interface standard for industrial USB3 vision cameras . The majority of camera manufacturers have already adopted this standard, and the number of compatible, accessories growing quickly. A big advantage of the USB3 interface is that, any of the PCs, laptops and smartphones have a USB 3.0 interface built in nowadays. In the field of vision technology, USB 3.0 is also replacing dated interfaces such as the FireWire, Cameralink and USB2.0. The speed of the USB3 Vision Camera Interface The USB 3.0 interface, also known as Super-Speed USB, is the following line of the well-known plug and play Universal Serial Bus spec that builds on the assets of USB 2.0 and washed out its weaknesses. The operative bandwidth accessible with the...

Read more