USB2 Vision Camera

The Mercury USB2.0 camera series is an industrial vision camera, with an USB2.0 interface. USB2.0 is the most price competitive interface regarding industrial machine vision cameras.
This model is interesting for you when your application complies with the following conditions:
-    An inexpensive industrial camera
-    Maximum cable length of 5 meters
-    Only one cable is required to connect the device
-    Dimensions are: 29x29x29mm
-    Optional hardware triggering

If more details are required, the manual can be consulted.

Specification MER-132-30UC

 

Color/Mono Color
Resolution 1292x964
Sensor Type Sharp 130
Optical Size 1/3"
Pixel Size 3.75um
Frame rate 30fps
Shutter type Global Shutter
ADC Bith Depth 12bit
Pixel Bit Depth 8bit, 12bit
Shutter time 50us~1s
Pixel Data Formats Bayer RG8 / Bayer RG12
Synchronization Hardware trigger, software trigger
I/O 1 opto-isolated input line and 1 opto isolated output line, 1 GPIO
Operating Temp. 0℃~45℃
Operating Humidity 10%~80%
Power Consumption <1.2W
Lens Mount C
Dimensions 29x29x29mm
Weight 42g
Software Windows XP/7/8/10 32 and 64 bit
Data Interface USB2.0
Programmable control Image size, gain, Exposure time, trigger polarity, flash polarity etc.
Conformity CE, GenICam









































 

Color Camera

A color camera makes use of a Bayer pattern to produce a colored image. The RGB value of every pixel is being calculated by taking the value of a pixel, in combination with all the values of neighboring pixels. This results into less sharp images than those of a monochrome camera.
Due to the RGB filter on the pixels, every single pixel, considering white light, on average has 66% less photons than a monochrome camera. Which makes a color camera less light sensitive than a monochrome one. To compensate this, the following options are available:
-    Increase the amount of light
-    Increase the gain
-    Increase shutter speed / exposure time
-    Select a more light sensitive sensor
-    Select a more light sensitive lens


With I/O:

The I/O connector from a USB camera is an 8 pin HR25 Hirose connector, which is a standard in the industrial machine vision market. This camera has an input that can be used as a hardware trigger for the device. The output of the camera can be used to trigger a light source, for example: LED. Furthermore, the camera has two GPIO’s (General Purpose Input/ Output) which can be programmed by using our SDK. The electrical diagrams to use the I/O connector are provided in the manual.


Information sensor manufacturer

(Please note that not all sensor features may be implemented)
The Sharp 130 1/3” Progressive Scan CCD  with 1.3MP resolution is the ideal replacement for all cameras with a Sony ICX445 sensor that are EOL. Both sensors have the same pixel size so the optical system can stay unchanged. Thanks to  iSHCCD II, the Sharp 130 is even more sensitive then the Sony ICX445 sensor that has HAD CCDII technology. It improves NIR and overall sensitivity thanks to microlenses and pixels with a thicker photoelectric region. Typical applications are: Replacement for EOL Sony ICX445 CCD camera, Machine Vision applications, ITS (intelligent traffic solutions).

https://www.youtube.com/watch?v=1sbk0Zr9hVo

Picture(s):
Options:
Price details:
Price per :
€ 147,00
Quantity: Order
Add to wishlist
 

Product number

MER-132-30UC 

Default delivery time

10 working days